Pointui » Home 2 Applets Showcase
[PointSense Widget] RamBattery 1.11 [12 nov] [Minor update]
(33 posts)-
ramses31
MemberPosted 9 months ago # -
geetarman
MemberAwsome!!! Great Work!!
Posted 9 months ago # -
Great !!!! I'll test it very soon ;)
Posted 9 months ago # -
Added, and really loving it ;) !
Plz, convert the applet photo into a widget ! That's the biggest thing that suite miss ;)
Posted 9 months ago # -
colincoxau
Memberramses works great on omnia i900. Only thing is when on 100% charge the % drops below and out of the background. See screenshot. It is no real problem just bringing it to your attention.
Attachments
-
sshot000.png (65.2 KB, 3 downloads) 9 months old
Posted 9 months ago # -
-
for what versions of pointsense is that or it is for all?
Posted 9 months ago # -
@ramses31
thx for ur great job!
but a little problem: when i click this widget, it happens nothing, although i've modified the cs.file.
could u tell me why, thx a lot.
Posted 9 months ago # -
zorg34
Member@ramses31
but a little problem: when i click this widget, it happens nothing, although i've modified the cs.file.
+1
Z34Posted 9 months ago # -
zorg34
Memberok it works now (after softreset of course ;) )
Z34
Posted 9 months ago # -
woem
Member@ramses
can you use the backgrounds of hhms for your background, they look smoother...
http://community.pointui.com/topic/pointsense-suite-hhms-little-mods#post-33249
Posted 9 months ago # -
ramses31
Member@zorg34
Thanks for the tip... I didn't notice a soft reset is needed to make it work, maybe sometimes it helps...@Zepiii
Which photo applet do you speak of ? If I have time I will look at it but that's not sure at all !@woem
Yeah, I know my background is not great ! I'll try to make a better one !@colincoxau
I will look at it... As I said, I have no QVGA device so I'm going to try something. Maybe just passing in small font when the value is 100...Posted 9 months ago # -
Melchiah
MemberTesting on my omnia.
It looks good, I will wait to reach 100% to see the bug but it works nice however.Posted 9 months ago # -
@zorg34 and ramses31
i reset the device, but it didn't work, when click still appear nothing. why?
thx
Posted 9 months ago # -
Hey Ramses !
I am speaking about this :
>>> http://community.pointui.com/topic/applet-pointsense-photo-v100-qvgaIt would be really wonderfull, as NorrinRadd doesn't answer anymore when i ask him on his topic to transform it...
Posted 9 months ago # -
zorg34
Membermoonflight
first time i install it pointsense became totally mad
soft reset and i see the battery icon in the middle of the first screen
i delete it and i do again the way to have it and it works well (with all options witch are describe at the top
sorry, i can say anymore for helping youZ34
Posted 9 months ago # -
tacchan23
MemberIs it possible to change the battery icon? (I don't have PointUI installed at the moment to test it)
Posted 9 months ago # -
colincoxau
Memberdeleted wrong post
Posted 9 months ago # -
davidc2000
MemberHello. I installed the wigit, and edited the wigitscontainer.cs file. The wigit reports the battery charge properly, but nothing happens when I "click" it. Where should I begin looking for my installation mistake?
Thank youUPDATE:
@ramses31.....Your fix worked perfectly on my Omnia i910. Thank you!Posted 9 months ago # -
Melchiah
MemberNothing happens when I click on it too.
Posted 9 months ago # -
ramses31
MemberOk, I think I know why there is a problem when clicking for some devices.
Try to replace the file in the Common directory by the one attached in this post. It should fix the problem. I will make a new release soon, with the fix and other improvements but for the moment, just copy this file... and tell me if it is ok.Ramses
Attachments
-
PointSenseBatteryWidgets.zip (2.9 KB, 77 downloads) 9 months old
Posted 9 months ago # -
-
Melchiah
MemberYeah it works now with your new file !
Thx.Posted 9 months ago # -
@ramses31
it works!
excellent!
best regards
Posted 9 months ago # -
ramses31
MemberNew V1.1
What's new in V1.1 :
- Bug fix when clicking on the widget to open the battery settings
- In QVGA, when 100% is displayed, it doesn't display outside the frame anymore
- The frame where value is displayed is smoother than before
If you have yet installed V1.0, just copy the files above the previous one. In that case you don't have to modify PointSenseWidgetsContainer.cs.
I couldn't test this version in QVGA so please tell me if it is ok.
Ramses
Posted 9 months ago # -
@ramses31
appreciate for ur good work,
but in the new cs file, wheather u add the code in the original file?
so we needn't to update the cs file else?
Posted 9 months ago # -
ramses31
Member@moonflight
Sorry, I don't understand your question.
Files that have been modified are the PointSenseBatteryWidgets.cs and many .jif image files.Posted 9 months ago # -
Melchiah
MemberYes, you don't have to modify the PointSenseWidgetsContainer.cs if already done.
So, I tested V1.1 and the 100% has not changed on WQVGA device.
It's still on 2 lines.Thx in advance.
Posted 9 months ago # -
colincoxau
MemberHi ramses, I have installed ver 1.1 on my Omnia i900 wqvga and as per melciah the 100% is still on 2 lines
Posted 8 months ago # -
ramses31
MemberDamn ! I don't have a QVGA device so I couldn't test but I thought it would be ok.... Can you please send me a screenshot with your device at 100% and another one with the device at a value less than 100% ?
Thanx...Posted 8 months ago # -
colincoxau
MemberHi Ramses here are some screen shots. As you can see if I change orientation it is OK. That may give you something to work on.
Attachments
- Screen03.png (62.9 KB, 0 downloads) 8 months old
- Screen02.png (63.3 KB, 0 downloads) 8 months old
- Screen01.png (62.9 KB, 0 downloads) 8 months old
Posted 8 months ago # -
Reply »
You must log in to post.