Pointui » Phone General Support

[sticky]

Phone [Build 1.0.08]

(38 posts)
  • Started 3 months ago by Shane
  • Latest reply from rexjustin
  • This topic is sticky
1 2

  1. Shane
    Pointui

    Pointui Phone
    Trial runs for 30 days (requires one time internet connection, activesync to PC is acceptable).
    Includes Classic and Zun3 themes.

    Technical Details:

    • WM5/6/6.1/6.5
    • Touch Screens Only
    • English Only
    • QVGA/WQVGA
    • VGA/WVGA


    This may work on square screen devices but we don't support them at present.
    This should run on non-English devices but we only support English at present.

    While Pointui Phone is running you will not have access to your standard WM Phone application. If you need to use your standard WM Phone application you can exit Pointui Phone (to exit click i then the power icon) at any time and it will resume working normally. If not, just soft reset your device.

    Fixes/Updates
    See Documentation

    Downloads
    See Product Page

    Posted 3 months ago #

  2. Montecristoff
    Pointui

    Thanks Shane ;)

    Posted 3 months ago #

  3. partha_rc
    Member

    @ all,

    This does not allow to dial special characters like *, #, etc. Is there a workaround ?

    partha_rc

    Posted 3 months ago #

  4. reekotubbs
    Member

    @Shane

    How can you tell how many days are left on the trial?
    And does our trail start again with this new build?

    Posted 3 months ago #

  5. ganzee
    Member

    Thanks for the latest version.

    There is a problem with the time format:

    12:51PM appears as 12:51...

    Posted 3 months ago #

  6. reekotubbs
    Member

    Also where is the option to send text messages

    Posted 3 months ago #

  7. Nimche
    Member

    Ye,
    Thanks Shane!

    Posted 3 months ago #

  8. Neff
    Member

    Spinning ball of doom is back in WinMo 6.5 on first launch. After closing/restarting PPhone it seems to have gone away.

    Posted 3 months ago #

  9. Nimche
    Member

    I am going back to 6.1 as I can't find a nice clean 6.5
    Anyone?

    Posted 3 months ago #

  10. Neff
    Member

    I am going back to 6.1 as I can't find a nice clean 6.5
    Anyone?

    Not sure what device you have, but NFSFan's WinMo 6.5 for the Touch Pro is amazing. It is just a clean, no frills ROM without all the silly energy fields or hex buttons.

    Posted 3 months ago #

  11. Nimche
    Member

    I have the Xperia! I can't wait to see the day you can upgrade hardware of your phone.

    Posted 3 months ago #

  12. Neff
    Member

    PPhone wont come up when I get phone calls. I get the Tachi canvas.

    Posted 3 months ago #

  13. NorrinRadd
    Member

    Great job Pointui Team! Been using it for awhile and finally bought it today! A bug I noticed is AM/PM indicator is dropped when time is 4 digits, see attached pic... Also, will future releases potentially include the following...

    1) Landscape support
    2) Profiles
    3) Headset status
    4) Speed dial support via dialpad
    5) Quickdialing when click or click-holding contact pic like standard Home2 contact card.
    6) Custom/user created themes

    Again, thanks for this wonderful, speedy, and refreshing phone app!!!!!!

    Attachments

    1. 091120122849.png (11.6 KB, 6 downloads) 3 months old
    Posted 3 months ago #

  14. Neff
    Member

    Incoming calls - PPhone sometimes comes up. I think if I use the WinMo 6.5 lock screen, it stops working.
    Checking call history form PPhone - doesn't remove missed call notification
    Calling voicemail from PPhone - brings up WinMo phone canvas.
    Dialing out through PPhone (with and without OEM skin) - I get the OEM skin (or lack of) instead of the PPhone skin.

    I like the software and will buy it if it works. As of now it doesn't work properly on my phone. Please tell me what information I can give you to get this to work.

    Posted 3 months ago #

  15. NorrinRadd
    Member

    @Neff:
    Are you using PPhone's "Load on device startup" function? If so, I ran into the exact issues your running into as well. Even with the delay option PPhone will only partially work like you're experiencing. Try starting it manually to see if it works properly without loading wm ph canvas... if it does then use my fix or biohazardousguy's tip here.

    Posted 3 months ago #

  16. Neff
    Member

    Thanks, I will give that a try

    Posted 3 months ago #

  17. fsp48
    Member

    I am using JD's 1118 6.5 rom on my TP2 without the spinning ball AFTER a soft reset. I have however lost the light sensor phone feature. It was nice to have the screen lock out when you put the phone to your head or in the case or face down. I will look through the forums and see if this is dependent on other things. Anyway I think I am diggin this dialer as the function of it is pretty sweet. The form is a bit abstract but I generally like function over form anyway.

    Posted 3 months ago #

  18. ganzee
    Member

    Still having problems with PPhone vs Standard Dialer. I made a call using PPhone and when it came to end the call, the Standard Dialer had partially appeared over PPhone. Will try reverting to NorrinRadd's Adrenaline solution as it appears there are still issues with the startup options of PPhone.

    I really want PPhone to work, but it is still too buggy to warrant a purchase.

    Posted 3 months ago #

  19. Neff
    Member

    So far, it seems that if you set PPhone to delay 90 seconds, it works (at least for outgoing calls).

    I wish they had a voicemail button. There isn't an easy way I have found to access VM

    Posted 3 months ago #

  20. Neff
    Member

    How do you add a person as a contact? I have the number (because the person called me) but I cant find a way to add that number to my contacts.

    Posted 3 months ago #

  21. ganzee
    Member

    So far, it seems that if you set PPhone to delay 90 seconds, it works (at least for outgoing calls).

    I wish they had a voicemail button. There isn't an easy way I have found to access VM

    90 seconds delay working fine so far. Thanks for the tip!

    Re the VM: Might be missing the point, but I have set my VM number as a contact, then added this to PPhone Favourite Contacts screen. Works for me.

    Posted 3 months ago #

  22. r613
    Member

    I really like this program but I am having a huge issue with incoming calls. All my incoming phone calls are coming up as Unavailable. But when I check the call log, it shows the correct phone number and when the phone goes to the main screen it will have the individuals correct phone number under last call. I am using the trial version on a Samsung Omnia i910 custom WM 6.5 ROM build 28002.5.3.0. Any assistance anyone can provide will be greatly appreciated.

    Posted 3 months ago #

  23. ganzee
    Member

    @Shane:

    Are you planning to add support for scroll-wheels? e.g. for my TyTN II

    I am finding the scrolling of the contacts list in PPhone quite awkward and it often opens a contact rather than scrolling - is the sensitivity set too high? Is anyone else having this issue?

    Posted 3 months ago #

  24. Neff
    Member

    I am getting the spinning wheel of doom on every incoming call.

    Posted 3 months ago #

  25. swastiverma
    Member

    How to do a conference call?????

    Posted 3 months ago #

  26. swastiverma
    Member

    I am not able to answer from phone once the Phone get locked and asks for Password??

    Is there any way out??

    Regards,
    Swasti Verma

    Posted 3 months ago #

  27. chriski
    Member

    My trial has now ended and I am left without the windows phone anymore - the settings suggested i turn it off to save memory which i did

    i don't know how to turn it back on without having "phone"

    can anyone help?

    Posted 3 months ago #

  28. Neff
    Member

    **Change your phone registry at your own risk. It shouldnt break anything, but dont blame me if somethign gets muxed**
    Taken from - http://community.pointui.com/topic/phone-build-1006-community-beta/page/2

    My trial has now ended and I am left without the windows phone anymore - the settings suggested i turn it off to save memory which i did

    i don't know how to turn it back on without having "phone"

    can anyone help?


    If you get get in to your registry, look for KLM\Security\Phone\Skin\Enabled
    If it is set to 0, change it to 1

    Posted 3 months ago #

  29. pd82f
    Member

    Hi,

    does anyone know how to disable the vibration feedback of the dialer screen? I just want my phone to be absolutely silent... ;-)

    --> I'm using a SE XPERIA X1

    Thanks in advance for your reply!

    Posted 2 months ago #

  30. esemar
    Member

    Are the videos supposed to be sales tools? The phone looks amazingly ugly with a chaotic screen.

    Posted 2 months ago #

RSS feed for this topic

1 2

Reply »

You must log in to post.