Pointui Topic: [Applet] CommMgr v2 with DATA connections with OO code (QVGA)

bearlover on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

bearlover — Sat, 19 Sep 2009 06:27:55 +0000

great i love it very much, thank you

kanickanic on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

kanickanic — Fri, 19 Jun 2009 03:29:18 +0000

great,i like it

pistillo99 on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

pistillo99 — Sun, 24 May 2009 17:36:57 +0000

Great applet! only one request if possible... Can you add a selection flash on the relative row when i push the screen to switch connections? It would be much profit...

yapingyang on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

yapingyang — Tue, 05 May 2009 07:15:30 +0000

thank,i like UI

pointuiuserlg on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

pointuiuserlg — Thu, 30 Apr 2009 14:57:20 +0000

is there any support planned for LG KS20 bluetooth? I tried current version and it doesn't work.

bob_moran on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

bob_moran — Tue, 17 Mar 2009 07:16:28 +0000

Ok, sorry but I had not seen that. thank you for the quick response

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Mon, 16 Mar 2009 15:50:54 +0000

in the first post (25 of february edit): "i have some layout work to do. there'll soon be a USB management button (mass storage / activesync) that's why there's a "hole" in the first menu" as i didn't change that, that means it's not available for the moment ;-) it's a little bit more tricky than switching between two values for the moment i'm quite busy with my job, so it's not for now but it's always in the pipe

bob_moran on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

bob_moran — Mon, 16 Mar 2009 14:02:59 +0000

I saw in the .cs there is a function to connect /disconnect USB, but it not appear on the commMgr, is it possible to activate it? and is ti possible to have choise in activsync and storage card ?

incite on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

incite — Thu, 26 Feb 2009 19:41:18 +0000

I can't turn on and off my bluetooth. Saw the same problem?

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Thu, 26 Feb 2009 08:42:01 +0000

subwoofer: thanks, i will have a look at localization to make a little more complete. i found a piece of code for language auto detection. this will be in the next version. i will include your translations in ;-)

subwoofer on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

subwoofer — Thu, 26 Feb 2009 08:00:03 +0000

@ InvalidCast here is the German Terms.xml .... i had to save it in Utf-8 Format because of the "ä". And i had to rename it to Terms.English.xml! Do you know why i had to do that? Thanks for this great Applet!

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Wed, 25 Feb 2009 18:56:18 +0000

new version with data connections management see first post

michaelp on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

michaelp — Mon, 23 Feb 2009 03:20:03 +0000

VGA Users try this attachment. Buttons are the same size but Text is Large. Navigable on my O2 Flame. Copy to \Program Files\Home2\AppletRibbon\CommMgr and rename to CommMgr.cs I suggest you might also rename the original file before renaming this one in case you want to revert to original. My edit is Label.SetFont("Font.Large"); where original setting is 'Small' I have set to 'Large'

ekyle on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

ekyle — Mon, 23 Feb 2009 02:46:03 +0000

I don't know much about coding applets. I only really know a little Java... Is there any way to remove the wifi feature and only have BT and Airplane Mode? I have an HTC Touch and it doesn't have wifi and it just seems strange seeing it on there. Thanks!

ludoui on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

ludoui — Mon, 23 Feb 2009 00:05:32 +0000

Hi, and thanx alot for your app. Simple & efficient, exactly what I need :) Yet, I am confused with the 'Flight Mode' icon : . if it triggers the FlightMode, shouldn'it rather be a Plane, like in HTC app? . if it triggers the Phone/Radio, shouldn'it rather be greyed when Phone/Radio is Off, rather than when it's On? Am I the only one thinking this way ??? Still, great job. Congratulations and regards.

madhatter on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

madhatter — Fri, 20 Feb 2009 17:01:15 +0000

i have a problem, with this comm manager and the other ones too. whenever i choose activate wifi... it removes the wifi from my phone!? it just completely gets rid of it and im just stuck there staring at my phone saying wtf. could anyone help me on this? i use wifi alot and a comm manager would be great to have. im using an omnia sch-i910

fluid on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

fluid — Fri, 20 Feb 2009 14:46:02 +0000

hey InvalidCast, that sounds perfect! That this feature would be comfortable when travelling and being in roaming mode didn't cross my mind yet but it's obvious - good point! :) looking forward to the next version!

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Thu, 19 Feb 2009 22:11:15 +0000

fluid, i already plan to add the possibility to enable / disable connections. do you know "NoData" app? i use this to disable my 3G connection when i go abroad (in France == free, abroad == $$$ ) i need a feature that Joel said it will be in 2.0.18. so basically, the idea is to have two button, "up" and "down" on the right, to navigate through the 3 existing buttons + usb button + one button per connection. by default, you will see the 3 first button, then, with "down" button, you will see others. scrolling is not yet possible, but i found a way to give the illusion ;-)

fluid on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

fluid — Thu, 19 Feb 2009 22:00:20 +0000

dear InvalidCast, thx for the great work! the only small feature i would request is this: in the windows mobile connection manager is an option available in the menu entitled "disconnect mobile network" (or something like this, only de-locale available over here). it disconnects any connected 3g/gprs/etc.-connection. this is a useful option as it allows me to disconnect my current 3g-connection and enabling the wifi on the same page - so the device just uses the activated wifi connection, when i'm in the ragen of my network. what do you/others think? cheers from vienna, Fluid

Twilightz1 on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

Twilightz1 — Thu, 19 Feb 2009 08:32:51 +0000

InvalidCast, Thanks! Looking forward to it. :-)

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Thu, 19 Feb 2009 06:50:50 +0000

Twilightz1: you're right, i uses sometimes too to switch from activesync mode to mass storage mode. will take a look at it (already have the good icon) i didn't find anything in the documentation, but i think i can find a registry key

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Thu, 19 Feb 2009 06:36:43 +0000

SwTaArRs: with my code: - when you disable gsm, it disables blutetooh and wifi - when you enable gsm, it disables blutetooh and wifi BUT, when the gsm is disabled, you can always turn on wifi and bluetooth. maybe, in the future, i will add a config file in which you would be able to say how the applet should work: - flight mode as the current one - strong flight mode (bluetooth and wifi cannot be activate in flight mode) - light flight mode, the one you want but it's not for now, it asks a little bit of change and test

Twilightz1 on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

Twilightz1 — Thu, 19 Feb 2009 01:51:16 +0000

Guys, Just wondering, how many folks here uses the 'USB to PC' function regularly? Would it be a good idea to add this functionality into this Applet? Thanks.

Montecristoff on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

Montecristoff — Wed, 18 Feb 2009 22:54:27 +0000

Nice and open! Thanks InvalidCast! >>> Added to the <a href="http://community.pointui.com/topic/applets-the-applets-store">Applets Store</a>

SwTaArRs on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

SwTaArRs — Wed, 18 Feb 2009 21:04:01 +0000

InvalidCast, thyanks for fast reply My phone's status -Bluetooth is on: "Devices 0" -Wifi is on: "Wifi is ON, not connected" When I close the phone it close the wifi and bluetooth and says: "Flight mode is on" I'd like to close the gsm but open the wifi of bluetooth. So it's best the gms in not connected to flight mode option. Though you can add another button for closing all networks and that button should say: "Flight mode is On" of "Flight mode is Off" The gsm networks should say: "Phone is on" or "Phone is off"

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Wed, 18 Feb 2009 20:53:33 +0000

i just checked, on my device, it's written "flight mode is off" when the phone is enabled. if you mean you don't want to see any label when the phone is on, just edit Terms.English.xml file, find: <term name="flight_mode.off">Flight Mode is off</term> and replace it by: <term name="flight_mode.off"></term>

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Wed, 18 Feb 2009 20:49:24 +0000

SwTaArRs: thanks for reporting issues. 1) WildSioux already reported the network name problem. as soon as i have a wifi source, i test it 2) do you mean that when the phone is not in flight mode: - the icon is good (green arrows) - but the label is wrong?

SwTaArRs on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

SwTaArRs — Wed, 18 Feb 2009 20:39:46 +0000

great app thanks. there is a small issue. when i open the wifi it autoconnects to my network, i can see it mobile's wireless manager, i can see the network's name, but in comm manager it says, wifi is on, not connected. and also when the phone is on ther eis no need to say flight mode is on. flight mode is on means all of them closed bluetooth, wifi and phone maybe you can add something like home 1.5

WildSioux on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

WildSioux — Wed, 18 Feb 2009 19:11:50 +0000

InvalidCast: That is an excellent idea. First, I tried the bluetooth and that didn't change the wifi status. Maybe there could be an option to tap and hold wifi to open another settings/status page in your applet. You could then set your prefered network and see a list of other available networks to connect to if its not automatically connected to your prefered network or last connected. Just an idea. Thank You! I really do appreciate your help and work.

InvalidCast on "[Applet] CommMgr v2 with DATA connections with OO code (QVGA)"

InvalidCast — Wed, 18 Feb 2009 18:41:23 +0000

WildSioux: the problem is that i don't have any wifi source for the moment. so i cannot test. so, are we talking about: - auto connection to a preferred network - or when you activate wifi, you then choose the network in the popup that appears several seconds later? this could help me understanding. there might be a late between the moment i ask the network name and the moment the device really connect to the network. try this: - turn wifi on - wait some time, to be sure wifi is connected on your network - then, switch on / off (depend of the current state) your bluetooth this to force a refresh of controls see me if then you show your network name